E-zzy the Sloth  User Manual

You’re holding a unique, multi-functional parent assistant: E-zzy the Sloth. E-zzy combines three different devices: it is a soothing sound emitting device, sleep monitor and parent’s personal assistant. Everything you need in one soft, plush sloth. We realize that parenthood is not exactly a bed of roses, but with E-zzy on your side you’ll see that it can be easier.

Parenthood is complicated – Make it E-zzy

Please read the safety recommendations carefully before using the device and the toy.

Ignoring the rules may be dangerous or illegal. Read this manual carefully for important safety information and operating instructions before using this toy.

• Keep these instructions for future reference, as they contain important information.
• If the toy is installed in a crib, bed, or pram, remove the toy to avoid the risk of a possible injury due to the child getting entangled when they start making the first attempts at crawling. Always fasten the Velcro opening completely to protect your child from contact with the soothing device.
• Remember that the device and the USB cord are not toys! To avoid injury, don’t leave the device and/or the USB cord near children unattended!
• Make sure the batteries are placed in correct positions (+/-). Keep batteries outside children’s reach. Use only the rechargeable batteries. Don’t mix different types of batteries, or new and old batteries of the same type. Remove the batteries if you’re not using the device for a long time. Exhausted batteries should be charged, or removed from the toy if

they are damaged. The supply terminals are not to be short-circuited. Do not throw exhausted batteries into the household waste; turn them in at a local recycling point.

• Do not overheat batteries or expose them to extreme cold (below 0°C/32°F or above 4°C/104°F), sunlight, or other heat sources. Extreme temperatures may affect battery life. Contact with liquids and metal objects may damage the battery. Do not destroy, damage, or dispose of this product in a fire – it may be dangerous, cause an explosion and fire.
• Do not use non-rechargeable and/or alkaline batteries. They can damage the device or cause fire or explosion of the battery and the device.
• Keep the batteries away from children. Rechargeable batteries should only be charged and replaced by an adult.
• When opening the battery compartment, keep sharp tools and screws outside children’s reach!
• IMPORTANT: Always consider your child’s safety!
• Check all elements of the product before use to ensure there are no potential deficiencies or threats to your child’s safety and health. If you notice any deficiency, immediately stop using the product and contact the manufacturer.
• Do not turn on the toy in locations where using electronic devices is forbidden, or where the device may cause interference or other accidents.
• Follow any and all instructions, rules, and warnings issued by the personnel employed at the place where you want to use the toy or the device.
• Do not turn on the toy or the device or use it near flammable materials.
• Cords and plastic wrap elements of the packaging may be swallowed by children, which may lead to choking and suffocation – keep them away from children.
• Children of all ages can use the toy, but when the sound producing device is installed, it is recommended not to leave children unattended.
• The toy includes magnets or magnetic elements. Magnets attached to each other or to a metal object when introduced to a human body may cause serious or lethal injury. In case of swallowing a magnet or introducing them to airways, immediately call 911.
• The soothing device emits electromagnetic waves at 2.4 GHz frequency. Other wireless devices may interfere with the toy’s Operation.
• The manufacturer shall not be liable for audio or video interference caused by self-made modifications or by using cords or chargers other that supplied with the product.
• Charge the device away from children.
• Before charging the device, remove it from the toy and always charge it on a flat surface.
• Stop charging the device if you see any signs of a possible malfunction.
• To avoid electric shock, do not immerse the device in water or other liquids.
• Do not shake or hit the device.
• Do not use the product if it is malfunctioning, has been dropped or damaged.
• Do not use the product for purposes other than those for which it was intended.
• The device is not water-resistant. Do not expose it to water or other liquids.
• Exposing the toy and/or device to water or other liquids may affect the life and work of electronic components.
• Don’t use the toy or the device in very humid or dusty environments, because water or dust particles may filter into the device and affect its electronic components, damaging or ruining the device.
• Keep away from intense sunlight and do not use near other devices that produce a lot of heat.
• Don’t use the device’s highest volume setting for a prolonged time and do not put your ear directly to the device when it’s working.

Package Contents

• E-zzy the Sloth plush toy
• One soothing device
• USB cord
• User guide

If any of the above is missing or damaged, contact the seller or the manufacturer.

Please keep the original packaging in case the product must be returned.

The packaging is not part of the toy.

Remove all elements of the packaging before giving the toy to a child.

The product’s appearance (shape and colors) may differ from the pictures presented in the photos and

drawings in the manual.

Starting the Soothing Device

 To operate, the device requires THREE RECHARGEABLE BATTERIES TYPE AAA (NiMH). Whisbear® recommends size AAA NiMH rechargeable batteries (1.2V), but remember that the actual size of batteries produced by different manufacturers may vary even if they are the specs are the same in the

documentation.

To insert or replace batteries, unscrew the screw and prise the plate open. Load the batteries into the

compartment and screw the plate back. If the batteries are flat, charge them with a recommended

RECHARGEABLE charger by connecting it to the USB port of the soothing device.

To turn the device on or off, press anywhere on the top side of the device briefly once. The soothing device may be also switched on the same way while secured in the E-zzy’s pocket.

Charging

 Before first use install new rechargeable batteries in the soothing device, and connect the device to a charger. Use the USB cord supplied with the product. Connect the USB cord to a charger. The charger is not included in the set. Connect the USB cord to the USB port in the device.

It takes about 2 hours to fully charge a completely dead battery. Disconnect external charger after that time.

It’s best to charge the device only after the batteries are completely depleted.

The device informs about depleted batteries with a short, intermittent audio signal. Low power may affect the quality and sound volume of soothing sound. If the audio quality or the volume of the soothing sound is significantly worse, replace the batteries.

Use only chargers dedicated for the device. Using non-compatible chargers and cords may cause permanent damage to the battery or the device. Failure to connect the charger correctly may damage the charger or the device. The warranty does not cover damage resulting from incorrect use.

Do not leave the toy unattended while it is charging.

To turn the device on or off, press the top of the device briefly once. It will gradually

automatically reduce the sound volume and turn off after about 45 minutes of work. The duration can be changed with the app.

Using the device with active CRYsensor feature

 The intelligent CRYsensor function analyzes the sound from its surroundings and it is particularly sensitive to a baby’s cry.

Soothing sound switches on automatically, when the device detects a sound and interprets it as a cry. If E-zzy the Sloth is located close to the child, the device may also switch on after detecting other loud noises that may wake the baby up, or when the baby moves rapidly.

To turn the device on or off, press the top of the device briefly once. It will gradually automatically reduce the sound volume and automatically switches to the 3-hour CRYsensor stand-by mode.

If the baby starts crying during the 3 hours of CRYsensor standby mode, the device analyzes the cry for a few seconds and automatically starts soothing sound for additional 45 minutes. After that time it switches to the 3-hour long CRYsensor standby mode again. The cycle is repeated until the device is switched off. The device switches off automatically after 3 hours if no crying is detected or it can be switched off manually by pressing the button.

The default duration of soothing sound and CRYsensor stand-by mode can be changed with the app.

Removing the batteries automatically restores the device’s default settings.

Turning the CRYsensor feature ON and OFF

 To turn the CRYsensor feature on or off, when the device is off (not producing soothing sound) press and hold the button on the device for about 3 seconds. A short audio signal confirms CRYsensor’s mode change.

Adjusting volume on the device

 Adjust the soothing sound volume according to your baby’s needs.

To adjust volume, press and hold the button for at least 3 seconds when the device is working (producing soothing sound). The

first time you do it, the sound volume increases; the second time it decreases. Pressing and holding the button for at least 3

seconds when the device is off (not producing soothing sound), switches the CRYsensor feature on or off.

The device remembers the selected volume value and, when switched on again, it will automatically use the last setting.

Bluetooth® connection

Turn on Bluetooth® on your mobile device and pair it with E-zzy through the Whisbear® app.

• Successful pairing is confirmed with the “E-zzy found” notification.
• You can start using E-zzy the Sloth now.

Switching the soothing device with the app

The basic version of the Whisbear® application manages your toy, pairing it with a Bluetooth® smart module.

At any moment only one device can be connected to E-zzy the Sloth. After severing the link, another device can connect to E-zzy

as long as it is paired with it via the same account.

Whisbear® app settings

 THE WHISBEAR® APP ALLOWS YOU TO:

• Turn the soothing sound on and off.
• Select the soothing sound’s duration. Available durations are: 15/25/45/60/75/90 minutes. Unless any of these options have been selected, Ezzy produces sound for 45 minutes. The app informs you of the remaining shushing time.
• Adjust the soothing sound volume. The app recognizes manual settings and displays them in the app screen. You can also adjust the sound volume manually, directly on the device (see ADJUSTING VOLUME ON THE DEVICE).
• Select the sound’s type.
• Turn the device on at specific time (IMPORTANT: if you do not turn this feature off, the device will switch on at that time every day).
• Turn the CRYsensor mode on and off. The device notifies the user if CRYsensor has been manually turned on/off.
• Set the active mode duration for the CRYsensor.
• Determine ambient noise level in the environment – this option changes CRYsensor’s sensitivity. Available settigns:

1) quiet – CRYsensor is more Sittensen to sounds (e.g. the room where the child sleeps is very quiet).; 2) loud – CRYsensor

is less sensitive to sounds (e.g. the room adjacent to the child’s room is noisy); 3) Default – default CRYsensor settings.

CRYALERT feature notifies you if a soothing sound has been switched on. If the app works in the background, the user still receives

notifications.

IMPORTANT: other features and functions of the Whisbear® App are available at www.whisbear.al

Installing the device in the toy

 Insert the soothing device into the pocket in the toy and secure it by completely closing the pocket with Velcro straps.

Once the device is secured inside, E-zzy the Sloth can be easily attached to the crib, pram, or car seat. The sloth’s paws have sewn-in magnets, which attach to each other when you bring together two front or two hind paws.

 Problem-Solving Guide

In case of any problems with the device, read the following tips first:

If the problem persists, contact the manufacturer’s customer service.

Care Instructions

To extend the product’s life:

• Avoid exposing the device to liquids,because they may damage the toy’s electronic components.
• Avoid exposing the toy to very high temperatures, which decrease the life of the device’s electronic components, may melt plastic elements and destroy the battery.

• Do not disassemble the device. Modifications made by untrained amateurs may severely damage or destroy the device.
• REMOVE the soothing device from toy before cleaning the sloth.
• The toy may be washed manually in a maximum temperature of 30°C/86°F.
• The toy may also be washed in a washing machine in a maximum temperature of 30°C/86°F a delicate program.
• Do not wash in the washer.
• Do not bleach or use other detergents.
• Do not dry in a combo washer-dryer.
• Do not iron.
• Do not dry-clean.
• Clean the device only using a dry cloth. Don’t use highly acidic or alkaline detergents.
• Use only original accessories. Breaking this rule may result in nullifying the warranty.
• The device’s packaging may be recycled according to the local regulations.
• ATTENTION! The manufacturer shall not be held responsible for the consequences of any situations involving incorrect use of the toy or not following the instructions in this user’s manual.

Recycling Information

The symbol on the product or on its packaging indicates that this product may not be treated as household waste.

Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. Failure to properly dispose of the product may result in a fine imposed according to the local law.

Do not throw exhausted batteries into the household waste, turn them in at a local recycling point.

User Guide

Agreements. No part of this user manual can be copied, distributed, translated, or handed over in any way or using any means, the manufacturer’s prior consent.

Appearance. The photos of the toy used in the manual may differ from the real product in terms of color or size.

Trademarks. All brands and manufacturer names are registered trademarks or reserved registered trademarks.

Warranty

• The warranty period for the product is 2 years.
• The warranty is voided if the product has been used inappropriately, is misshapen or has been repaired by unauthorized persons.
• Original receipt is required for the warranty.
• Keep the user’s manual for further reference

The toy is made from certified and anti-allergic textiles which are safe for children.Safe to use from the first day of life.Tested by TÜV Rheinland (Shenzhen) Co., Ltd. Complies with with European New Toy Safety Directive 2009/48/EC TÜV-ReferenceNo. 0164116401d 001 and in UL International and Instytut Łączności przy Państwowym Instytucie Badawczym in Poland.Manufacturer Information: Whisbear Sp. z o.o. Zielona 32, 02-913 Warsaw Poland.